Turn any t-shirt, bag, or jacket into a TACDA Team item with this 3 x 3 TACDA Logo Embroidered Iron On Patch.
— OR —
Turn any t-shirt, bag, or jacket into a TACDA Team item with this 3 x 3 TACDA Logo Embroidered Iron On Patch. Simply heat up your iron, place the patch embroidered side up and heat on a medium setting for 5-20 seconds. Machine washable.
Steps in Attaching the Iron-On Backing for Embroidered and Woven Patches
1). Ensure that the fabric surface is clean and free of wrinkles.
2). Warm the iron or press to medium about 140~150 degrees Celsius.
3). Pre-heat the location where the patch is going to be put on.
4). Place the patch and put a thin cloth on top of it.
5). Iron with moderate pressure of 3KG/Square inches at least for 5-20 seconds.
6). Turn the garment inside-out and iron the back of the patch firmly for 20-30 seconds.
7). Let it cool for one minute. If the edge of the patch can still be lifted, repeat step 6.
Care and Use of Iron-On Backing
1). Hand-Wash or use a mesh clothing bag in your machine.
2). Turn clothing inside-out during normal ironing.
3). While durable, patch adhesive may not be waterproof.
4). Some materials, like mesh or coated fabrics, Sweater, rib, or fabric with a lot of stretch/rough surface, may not be suitable for the iron-on items.
There are no reviews yet.
Your email address will not be published. Required fields are marked *
Your review *
Thanks for subscribing! Please check your email for further instructions.